Boat Drinks  

Go Back   Boat Drinks > General > General Disruption

Reply
 
Thread Tools Display Modes
Old 10-07-2009, 14:37   #31
Jingo
Smother me in chocolate and eat flapjacks with it!
 
Join Date: Sep 2008
Location: North Somerset
Posts: 1,854
Default

Mark what's the issue with the washing machine? Wish I'd have seen this thread earlier and could have possibly advised about the fridge also - give me a nudge on msn and I'll see if I can help you out with anything.
__________________
Jingo is offline   Reply With Quote
Old 10-07-2009, 15:10   #32
Mark
Screaming Orgasm
 
Join Date: Jul 2006
Location: Newbury
Posts: 15,194
Default

Fridge is fixed. It has a cooling fan for the evaporator tubing system and the motor on that had burned out (partly because it was trying to force air through ten years worth of accumulated fluff). As a result a thermal cut-out was triggered as soon as it started to freeze. It cost me what I said above but the fridge/freezer are now running perfectly again and long may that continue.

As for the washing machine, it's just old (16 years and counting) and suffering fatigue. When it fails, it fails, and I'll get a new one - it's well beyond economical repair.

PS - the reason I got chatting to my (now) friendly neighbours was that they decided they wanted to have cavity wall insulation done and needed me 'in' to make that happen. So, I got a quote from their contractor. £139. Bargain. I've wanted to have this done for about 10 years but never had the option before (I live upstairs, so I had to wait for downstairs to get theirs done) so that was easy.

Last edited by Mark; 17-07-2009 at 13:27.
Mark is offline   Reply With Quote
Old 17-07-2009, 12:54   #33
Mark
Screaming Orgasm
 
Join Date: Jul 2006
Location: Newbury
Posts: 15,194
Default

Not going to be counting any chickens but there's currently a nice pyrotechnic display going on outside, and NO LEAKS inside. The same cannot be said for my workplace, which is leaking like a sieve (to the extent that they've just had to close part of it). Ha!

Edit - There's a bloomin' Monsoon going down outside. I've got a leaky gutter (already knew, poor installation) but still no gardez l'eau inside.

Last edited by Mark; 17-07-2009 at 13:27.
Mark is offline   Reply With Quote
Old 17-07-2009, 13:48   #34
Nutcase
Moonshine
 
Nutcase's Avatar
 
Join Date: Dec 2006
Location: Chelmsford, innit!
Posts: 3,979
Default

Cool

The local and recently rebuilt sainsburys with a shiny new roof is leaking big time
Nutcase is offline   Reply With Quote
Old 17-07-2009, 14:23   #35
Mark
Screaming Orgasm
 
Join Date: Jul 2006
Location: Newbury
Posts: 15,194
Default

And Broomfield Road is suitably flooded too.

Every time I hear something click I go check the bucket. I've even thought I've felt water a few times. Paranoia or what.
Mark is offline   Reply With Quote
Old 17-07-2009, 14:46   #36
Treefrog
Survivor
 
Treefrog's Avatar
 
Join Date: Aug 2006
Location: Chell Heath, Stoke-on-Trent
Posts: 1,761
Default

Glad it's going well for you Mark, my problem is the reverse - looks like a cracked main in the front garden, so it resembles the Okavango delta atm. According to the Severn Trent engineer who came out to look at it that is. Also, because it appears to be inside my front garden rather than the other side of the wall, they may not fix it, but they will be kind enough to put it a stop tap outside the property to turn off the water before it gets to the leak.
__________________

Commit random kindness and senseless acts of beauty
Treefrog is offline   Reply With Quote
Old 07-09-2009, 12:59   #37
Mark
Screaming Orgasm
 
Join Date: Jul 2006
Location: Newbury
Posts: 15,194
Default

Hope the Okavango delta is a little less wet now.

Well, still no roof leaks, so the toilet decided to leak instead. No idea how long it's been doing that but thank heavens I don't have a water meter. As soon as I found out I broke out the tools and had at what I think is the problem with a spanner. Not sure who will be learning who, but there hasn't been an impromptu geyser yet, so I may be safe.

Oh, and a workman kindly turned my walls into swiss cheese this morning. Not to worry though - he filled all the holes afterwards and hopefully my heating bills will go down this winter. Just got the internal clean-up to do now as I currently can't find my bed.
Mark is offline   Reply With Quote
Old 07-09-2009, 13:26   #38
Belmit
The Mouse King of Denmark
 
Belmit's Avatar
 
Join Date: Jul 2006
Location: The Winchester
Posts: 6,476
Default

Quote:
Originally Posted by Mark View Post
As soon as I found out I broke out the tools and had at what I think is the problem with a spanner.
God help us.
__________________
Belmit is offline   Reply With Quote
Old 07-09-2009, 14:00   #39
Mark
Screaming Orgasm
 
Join Date: Jul 2006
Location: Newbury
Posts: 15,194
Default

It'll be fine. All I did was lower the ball valve a little so it cuts off before reaching the overflow instead of after. Anything more complicated than that and I'd have called a professional. I know my limits.

Uh oh!
Mark is offline   Reply With Quote
Old 18-09-2009, 07:25   #40
Fayshun
Rocket Fuel
 
Fayshun's Avatar
 
Join Date: Jun 2006
Location: Adrift in the Orca
Posts: 6,845
Default

AARRGGHH!!

Car's just come out the garage, new front discs and pads. "Only" £99.97 (I let him keep the 3p as a tip)

The TV is on the way out, picture looks like an over-exposed photo, whites look pink and it doesn't matter what input you use (Hannspree had better warranty replace it). Just in time for my blu-ray player to arrive.

And on the way to Tesco last night the f****** car went on the fritz again. Power steering/brakes went heavy and the battery warning light came on.

And we're supposed to drive down to Havant tomorrow for a wedding.



</rant>
__________________

We must move forward not backward, upwards not forward, and always twirling, twirling, twirling...
Fayshun is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 19:49.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.