Did a little work on the Blazer today.

Darrin · 15-05-2008, 22:08

That little rust spot has been bugging the hell out me to the point of me not waxing that side.

Took the grinder to it.

Add in a little JB Cold Weld liquid steel as filler...

Throw on some primer.

And a little rattle can paint that was as close a match as I could find. I had to take a little drive into town before I could snap a final picture, so it got all dirty. I'm going to let it sit overnight and wash it then buff it out tomorrow. I'll then throw on a coat of wax to the whole side and take another picture.

15-05-2008, 22:08	#1
Darrin Dirteh Kitteh Join Date: Jan 2007 Location: Hiding out in Mormon Country Posts: 1,629	Did a little work on the Blazer today. That little rust spot has been bugging the hell out me to the point of me not waxing that side. Took the grinder to it. Add in a little JB Cold Weld liquid steel as filler... Throw on some primer. And a little rattle can paint that was as close a match as I could find. I had to take a little drive into town before I could snap a final picture, so it got all dirty. I'm going to let it sit overnight and wash it then buff it out tomorrow. I'll then throw on a coat of wax to the whole side and take another picture. __________________ A bullet may have your name on it, but shrapnel is addressed "to whom it may concern".

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode