Anyone familiar with a sym jet 100 scooter?

Darrin · 26-01-2009, 21:02

I have a friend that lives over there that needs a new piston and crankshaft for one. And possibly someone to help put it all together. He's a little skint right now (single dad of three kids), so would probably only be able to pay in kindness (or I could for him without him knowing).

He's very proud and is stuck walking an hour to work and an hour home. And when that's all said and done he's out of energy to do anything with his kids (all teenagers).

I'd really like to help him out, so if any of you have any contacts or friends at a local scooter shop I could find out where he is and see about getting you in touch with him (I have him on MSN right now).

Thanks bunches, folks.

Darrin

Nutcase · 26-01-2009, 21:47

Never heard of it!

But there's a service manual here:

http://www.sgnc.dk/documents/00032.pdf

And maybe a replacement engine would be easier and cheaper?

http://cgi.ebay.co.uk/sym-jet-100-en...1%7C240%3A1318

Don't know anything about scooters unfortunately.

Darrin · 27-01-2009, 04:47

Thanks for the info. I think that could possibly be the best route so far.

I appreciate you getting back to me for him.

Nutcase · 27-01-2009, 07:28

No problem

Burble · 27-01-2009, 09:58

Whereabouts is he located? I'm sure an engine change on a scooter can't be too hard.

Justsomebloke · 27-01-2009, 10:29

^^ What he said, Location ?
Scooter engines are a doddle, Cables off,Fuel line, a few bolts & it drops out. I'm not familiar with those at all but I have done Untold Brettas & Vespas back in the day

If the crank is fubared then the engine swap is definately the way to go & it is that easy that with a decent manual & a few people to phone if needed he'd do it himself.

Darrin · 28-01-2009, 00:00

I was talking to him today and he's had an offer of a partex on a 125 Piago for 700 quid. If he can come up with the cash he's going that route, but if cash becomes too much of a problem he'll be picking up an engine.

I told him he could do the engine swap in his living room with a Phillips screwdriver and an adjustable wrench basically. I asked him if he could change a power supply in a computer or a ceiling rose. He said yeah. I told him he was thereby qualified to do the engine swap on his bike.

He lol'd.

I don't remember where he said he lived. I'll ask him again.

26-01-2009, 21:02	#1
Darrin Dirteh Kitteh Join Date: Jan 2007 Location: Hiding out in Mormon Country Posts: 1,629	Anyone familiar with a sym jet 100 scooter? I have a friend that lives over there that needs a new piston and crankshaft for one. And possibly someone to help put it all together. He's a little skint right now (single dad of three kids), so would probably only be able to pay in kindness (or I could for him without him knowing). He's very proud and is stuck walking an hour to work and an hour home. And when that's all said and done he's out of energy to do anything with his kids (all teenagers). I'd really like to help him out, so if any of you have any contacts or friends at a local scooter shop I could find out where he is and see about getting you in touch with him (I have him on MSN right now). Thanks bunches, folks. Darrin __________________ A bullet may have your name on it, but shrapnel is addressed "to whom it may concern".

27-01-2009, 04:47	#3
Darrin Dirteh Kitteh Join Date: Jan 2007 Location: Hiding out in Mormon Country Posts: 1,629	Thanks for the info. I think that could possibly be the best route so far. I appreciate you getting back to me for him. __________________ A bullet may have your name on it, but shrapnel is addressed "to whom it may concern".

27-01-2009, 10:29	#6
Justsomebloke The Night Worker Join Date: Jul 2006 Posts: 5,228	^^ What he said, Location ? Scooter engines are a doddle, Cables off,Fuel line, a few bolts & it drops out. I'm not familiar with those at all but I have done Untold Brettas & Vespas back in the day If the crank is fubared then the engine swap is definately the way to go & it is that easy that with a decent manual & a few people to phone if needed he'd do it himself. __________________

28-01-2009, 00:00	#7
Darrin Dirteh Kitteh Join Date: Jan 2007 Location: Hiding out in Mormon Country Posts: 1,629	I was talking to him today and he's had an offer of a partex on a 125 Piago for 700 quid. If he can come up with the cash he's going that route, but if cash becomes too much of a problem he'll be picking up an engine. I told him he could do the engine swap in his living room with a Phillips screwdriver and an adjustable wrench basically. I asked him if he could change a power supply in a computer or a ceiling rose. He said yeah. I told him he was thereby qualified to do the engine swap on his bike. He lol'd. I don't remember where he said he lived. I'll ask him again. __________________ A bullet may have your name on it, but shrapnel is addressed "to whom it may concern".

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

26-01-2009, 21:47	#2
Nutcase Moonshine Join Date: Dec 2006 Location: Chelmsford, innit! Posts: 3,979	Never heard of it! But there's a service manual here: http://www.sgnc.dk/documents/00032.pdf And maybe a replacement engine would be easier and cheaper? http://cgi.ebay.co.uk/sym-jet-100-en...1%7C240%3A1318 Don't know anything about scooters unfortunately.

27-01-2009, 07:28	#4
Nutcase Moonshine Join Date: Dec 2006 Location: Chelmsford, innit! Posts: 3,979	No problem

27-01-2009, 09:58	#5
Burble Rocket Fuel Join Date: Jul 2006 Posts: 7,826	Whereabouts is he located? I'm sure an engine change on a scooter can't be too hard.