What's a better way to Overclock?

Feek · 31-03-2007, 22:41

So what's better for my E6600?

Just increase fsb or decrease multiplier and increase the fsb further?

The default multiplier is 9.

If I set the fsb to 1266 then I get a clock speed of 2.85GHz

Or I can reduce the multiplier to 8 and set the fsb to 1425 to get the same clock speed of 2.85GHz, and it's running cooler.

Is one way recognised as being better than the other at all?

8 I3ALL · 01-04-2007, 00:54

Always try to get the highest FSB so drop that multi to 8

What are ya temps like at 2.85 ?

Stan_Lite · 01-04-2007, 08:12

Higher FSB gives a marginal increase in performance at the same clock speed so always better to have it as high as possible - as long as your RAM can handle it.

Stan

Feek · 01-04-2007, 10:23

Last night it was working fine at those speeds mentioned above, with Orthos running for a few hours on blend with no problems. Temps last night were 47-50 on Orthos blend at priority 9.

This morning after being off all night, I was getting BSOD on boot up so I've set everything back to stock.

I'm wondering if my 4 year old tube of AS5 has gone off. I had to use an awful lot to get a coating on the CPU and even though I got it as thin as I could, it still felt wrong. I seem to remember it being quite a thin product and easy to spread but it was thick and pasty.

At stock clocks and volts, I've got 33C.

I'm going to buy a new tube and re-apply before I do any more OCing.

Stan_Lite · 01-04-2007, 10:29

I find the same with AS5. It tends to get thick and sticky as it ages and doesn't spread as well, giving an over thick layer. I've lost count of the number of half full tubes I've thrown out.

Stan

LeperousDust · 01-04-2007, 17:03

I've always found AS5 to be sticky and gluey, but once it warms up its much thinner, i heat it up then spread it, its much easier and you get a slightly better coat, and this feels really anal and geeky talking about it

8 I3ALL · 01-04-2007, 17:50

Well ive just started pushing my E6600 again after fitting the W/C yesterday im upto 3.32ghz

FSB= 1660
Multi= 8
Memory= 415 4,4,4,12
Voltage 1.325

Temps
Idle
Core 1 25oc
Core 2 27oc

Both Cores 100% loaded 2 instances of Othos priority 1 StressCPU
Core 1 34oc
Core 2 36oc

Im sure this CPU has more to give so im going to let it all settle in then push again in a few days

Feek · 01-04-2007, 20:52

w/c is starting to tempt me! What are you using?

8 I3ALL · 01-04-2007, 21:19

Quote:

Originally Posted by Feek

w/c is starting to tempt me! What are you using?

Its a custom build

DD 5.25 water tank
DCC pump with perspex top
DD tdx waterblock
120x2 Rad

Maybe this little screen snip will twist ya arm

LeperousDust · 02-04-2007, 16:57

And in some cases it can be quieter, and still keep temps cooler than air ever could.

Personally i use the reserator, because i want absolute silence, but it still allows me to overclock which i see as a bonus!

31-03-2007, 22:41	#1
Feek ex SAS Join Date: Jun 2006 Location: JO01ou Posts: 10,062	What's a better way to Overclock? So what's better for my E6600? Just increase fsb or decrease multiplier and increase the fsb further? The default multiplier is 9. If I set the fsb to 1266 then I get a clock speed of 2.85GHz Or I can reduce the multiplier to 8 and set the fsb to 1425 to get the same clock speed of 2.85GHz, and it's running cooler. Is one way recognised as being better than the other at all? __________________

01-04-2007, 00:54	#2
8 I3ALL Vodka Martini Join Date: Jul 2006 Location: In Forum Heaven Posts: 732	Always try to get the highest FSB so drop that multi to 8 What are ya temps like at 2.85 ? __________________ MySpace Last edited by 8 I3ALL; 01-04-2007 at 01:01.

01-04-2007, 08:12	#3
Stan_Lite Stan, Stan the FLASHER MAN! Join Date: Jul 2006 Location: In bed with your sister Posts: 5,483	Higher FSB gives a marginal increase in performance at the same clock speed so always better to have it as high as possible - as long as your RAM can handle it. Stan __________________ Just because I have a short attention span doesn't mean I...

01-04-2007, 10:23	#4
Feek ex SAS Join Date: Jun 2006 Location: JO01ou Posts: 10,062	Last night it was working fine at those speeds mentioned above, with Orthos running for a few hours on blend with no problems. Temps last night were 47-50 on Orthos blend at priority 9. This morning after being off all night, I was getting BSOD on boot up so I've set everything back to stock. I'm wondering if my 4 year old tube of AS5 has gone off. I had to use an awful lot to get a coating on the CPU and even though I got it as thin as I could, it still felt wrong. I seem to remember it being quite a thin product and easy to spread but it was thick and pasty. At stock clocks and volts, I've got 33C. I'm going to buy a new tube and re-apply before I do any more OCing. __________________

01-04-2007, 10:29	#5
Stan_Lite Stan, Stan the FLASHER MAN! Join Date: Jul 2006 Location: In bed with your sister Posts: 5,483	I find the same with AS5. It tends to get thick and sticky as it ages and doesn't spread as well, giving an over thick layer. I've lost count of the number of half full tubes I've thrown out. Stan __________________ Just because I have a short attention span doesn't mean I...

01-04-2007, 17:03	#6
LeperousDust Bananaman Join Date: Jul 2006 Location: Liverpool/Edinburgh Posts: 4,817	I've always found AS5 to be sticky and gluey, but once it warms up its much thinner, i heat it up then spread it, its much easier and you get a slightly better coat, and this feels really anal and geeky talking about it __________________

01-04-2007, 17:50	#7
8 I3ALL Vodka Martini Join Date: Jul 2006 Location: In Forum Heaven Posts: 732	Well ive just started pushing my E6600 again after fitting the W/C yesterday im upto 3.32ghz FSB= 1660 Multi= 8 Memory= 415 4,4,4,12 Voltage 1.325 Temps Idle Core 1 25oc Core 2 27oc Both Cores 100% loaded 2 instances of Othos priority 1 StressCPU Core 1 34oc Core 2 36oc Im sure this CPU has more to give so im going to let it all settle in then push again in a few days __________________ MySpace

01-04-2007, 20:52	#8
Feek ex SAS Join Date: Jun 2006 Location: JO01ou Posts: 10,062	w/c is starting to tempt me! What are you using? __________________

02-04-2007, 16:57	#10
LeperousDust Bananaman Join Date: Jul 2006 Location: Liverpool/Edinburgh Posts: 4,817	And in some cases it can be quieter, and still keep temps cooler than air ever could. Personally i use the reserator, because i want absolute silence, but it still allows me to overclock which i see as a bonus! __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode