Sodding Sods - light cluster broked - Page 3

Lopez · 24-01-2010, 14:23

It's much easier to take the headlamp out and drill a small drain hole in the plastic housing rather than through the glass.

Pickers, from what I remember it's just a few bolts holding the lamp on, 5 minute job if you want to change it yourself

Pickers · 24-01-2010, 14:25

Quote:

Originally Posted by Lopez

It's much easier to take the headlamp out and drill a small drain hole in the plastic housing rather than through the glass.

Pickers, from what I remember it's just a few bolts holding the lamp on, 5 minute job if you want to change it yourself

I'll wait till I got the new unit here I think. I tried to undo one bolt and one screw, and they were well and truely stuck fast... boo.

Pickers · 30-01-2010, 11:55

Sodding PoS car. Got up this morning to drive down to cornwall to get the lights fixed in a workable environment, and the effing starter motor wouldnt even turn over.
Managed to bump start it with a mate from round the corner who dragged himself out of bed to help. Once the lights are done Im gonna get rid of it asap!

Pickers · 31-01-2010, 10:26

New headlamp unit has gone in no worries, except that the headlamp alignment is WAY off. Theres only one adjustment screw that I can see, and it doesnt appear to do much, which has made me concerned that the replacement unit is faulty in that department. Still - at least I have lights. I can use the electronic alignment selector, but that brings down the passenger side too.

24-01-2010, 14:23	#21
Lopez Bad Cat Join Date: Jul 2006 Location: Leicestershire Posts: 808	It's much easier to take the headlamp out and drill a small drain hole in the plastic housing rather than through the glass. Pickers, from what I remember it's just a few bolts holding the lamp on, 5 minute job if you want to change it yourself __________________ NO

30-01-2010, 11:55	#23
Pickers Absinthe Join Date: Jul 2006 Location: Cornwall Posts: 2,692	Sodding PoS car. Got up this morning to drive down to cornwall to get the lights fixed in a workable environment, and the effing starter motor wouldnt even turn over. Managed to bump start it with a mate from round the corner who dragged himself out of bed to help. Once the lights are done Im gonna get rid of it asap! __________________ Pictures

31-01-2010, 10:26	#24
Pickers Absinthe Join Date: Jul 2006 Location: Cornwall Posts: 2,692	New headlamp unit has gone in no worries, except that the headlamp alignment is WAY off. Theres only one adjustment screw that I can see, and it doesnt appear to do much, which has made me concerned that the replacement unit is faulty in that department. Still - at least I have lights. I can use the electronic alignment selector, but that brings down the passenger side too. __________________ Pictures