Poor PC performance? - Page 3

Mark · 01-10-2006, 21:49

Most RAID arrays worth anything store some data on the disks so they can tell which disk is which.

Stan_Lite · 02-10-2006, 05:38

Oddly enough, my RAM won't accept 4-4-4-12 either (Geil) or any manually set parameters. It works fine on auto but as soon as I change anything manually - it goes tits up.
I've even tried setting it up manually exactly the same as the auto settings (5-5-5-15 etc.) but it still won't have it

I ran memtest which showed errors on the first pass but never showed anything again (I have tested it several times now). I will have to try some different RAM when I get back and see if it's a problem with the RAM or with the mobo.

'fraid I can't help you with that at the moment. If I suss something out, I'll let you know.

If it works on auto then that'll be fine for now - DDR2 RAM performance is less dependent on timings than DDR1 was/is.

Glad you got your RAID sorted, that must have had your sphincter twitching.

Stan

killerkebab · 03-10-2006, 17:10

Arctic Freezer 7 and some Silver 5 paste have just arrived. Quick question before I attempt the switch: Is the slim layer of paste on the bottom of the Freezer7 enough, or should I add some more from the tube of AS5 I ordered? How much is enough? How can I spread the paste if need be? Do I apply the paste onto the cooler or onto the CPU?

Sorry for all these questions guys, I'm nearly there, promise

Daz · 03-10-2006, 17:12

Have a read here

Stan_Lite · 03-10-2006, 17:19

If the goo is already applied to the heatsink, that should do fine (I didn't know the Arctic 7 came with goo applied - you could have saved yourself a few quid).

Make sure you get all of the old paste off the CPU before you stick it all together. If the paste is too thick or uneven, you won't get good heat distribution.
Wiping it off thoroughly with a tissue would do but it's better if you use some solvent (Isopropyl alcohol from the chemist does nicely - the purer the better).

If you want, you can take the pre-applied stuff off the heatsink and apply the AS5 but, TBH you probably wouldn't notice more than a degree or so of difference - it's usually pretty good and evenly applied.

Feel free to ask as many questions as you like

Stan

Stan_Lite · 03-10-2006, 17:21

Quote:

Originally Posted by Daz

Have a read here

This works but I find I get slightly better results by spreading the goo evenly with a plastic (credit type) card (using the same quantities).

Stan

killerkebab · 05-10-2006, 21:01

Well friends, I got the Isopropyl and gave my CPU a quick wipe and used the goo already on my heatsink as per Stan's instructions. I then installed the AF7.

Started the PC up and... 28-32C on idle

I have got to thank you guys, I would never have been able to do it on my own and you have all just saved my system. If there's ever anything I can do for you, let me know and I'll do it.
I already owe you all a pint of whatever drink you like

Stan_Lite · 09-10-2006, 17:57

Quote:

Originally Posted by killerkebab

Well friends, I got the Isopropyl and gave my CPU a quick wipe and used the goo already on my heatsink as per Stan's instructions. I then installed the AF7.

Started the PC up and... 28-32C on idle

I have got to thank you guys, I would never have been able to do it on my own and you have all just saved my system. If there's ever anything I can do for you, let me know and I'll do it.
I already owe you all a pint of whatever drink you like

Glad to have helped dude, hope everything goes all right from now

You do realise that you've just offered to buy a pint of whatever I want to the guy who had a pint of whisky at the London meet

Stan

killerkebab · 09-10-2006, 20:26

Quote:

Originally Posted by Bijstan

Glad to have helped dude, hope everything goes all right from now

You do realise that you've just offered to buy a pint of whatever I want to the guy who had a pint of whisky at the London meet

Stan

Whisky? Be my guest! A small price to pay for your help

Will · 09-10-2006, 21:09

Now we just need to grab KK out to meet in town

02-10-2006, 05:38	#22
Stan_Lite Stan, Stan the FLASHER MAN! Join Date: Jul 2006 Location: In bed with your sister Posts: 5,483	Oddly enough, my RAM won't accept 4-4-4-12 either (Geil) or any manually set parameters. It works fine on auto but as soon as I change anything manually - it goes tits up. I've even tried setting it up manually exactly the same as the auto settings (5-5-5-15 etc.) but it still won't have it I ran memtest which showed errors on the first pass but never showed anything again (I have tested it several times now). I will have to try some different RAM when I get back and see if it's a problem with the RAM or with the mobo. 'fraid I can't help you with that at the moment. If I suss something out, I'll let you know. If it works on auto then that'll be fine for now - DDR2 RAM performance is less dependent on timings than DDR1 was/is. Glad you got your RAID sorted, that must have had your sphincter twitching. Stan __________________ Just because I have a short attention span doesn't mean I...

03-10-2006, 17:10	#23
killerkebab Vodka Martini Join Date: Sep 2006 Location: Bristol/Reading Posts: 656	Arctic Freezer 7 and some Silver 5 paste have just arrived. Quick question before I attempt the switch: Is the slim layer of paste on the bottom of the Freezer7 enough, or should I add some more from the tube of AS5 I ordered? How much is enough? How can I spread the paste if need be? Do I apply the paste onto the cooler or onto the CPU? Sorry for all these questions guys, I'm nearly there, promise __________________

03-10-2006, 17:12	#24
Daz The Stig Join Date: Jun 2006 Location: Swad! Posts: 10,713	Have a read here __________________ apt-get moo

03-10-2006, 17:19	#25
Stan_Lite Stan, Stan the FLASHER MAN! Join Date: Jul 2006 Location: In bed with your sister Posts: 5,483	If the goo is already applied to the heatsink, that should do fine (I didn't know the Arctic 7 came with goo applied - you could have saved yourself a few quid). Make sure you get all of the old paste off the CPU before you stick it all together. If the paste is too thick or uneven, you won't get good heat distribution. Wiping it off thoroughly with a tissue would do but it's better if you use some solvent (Isopropyl alcohol from the chemist does nicely - the purer the better). If you want, you can take the pre-applied stuff off the heatsink and apply the AS5 but, TBH you probably wouldn't notice more than a degree or so of difference - it's usually pretty good and evenly applied. Feel free to ask as many questions as you like Stan __________________ Just because I have a short attention span doesn't mean I...

05-10-2006, 21:01	#27
killerkebab Vodka Martini Join Date: Sep 2006 Location: Bristol/Reading Posts: 656	Well friends, I got the Isopropyl and gave my CPU a quick wipe and used the goo already on my heatsink as per Stan's instructions. I then installed the AF7. Started the PC up and... 28-32C on idle I have got to thank you guys, I would never have been able to do it on my own and you have all just saved my system. If there's ever anything I can do for you, let me know and I'll do it. I already owe you all a pint of whatever drink you like __________________

01-10-2006, 21:49	#21
Mark Screaming Orgasm Join Date: Jul 2006 Location: Newbury Posts: 15,194	Most RAID arrays worth anything store some data on the disks so they can tell which disk is which.

09-10-2006, 21:09	#30
Will BBx woz 'ere :P Join Date: Jan 1970 Posts: 2,147,487,208	Now we just need to grab KK out to meet in town __________________ *No No!*